Free referral line · Independent guides, every cost sourced Calls answered 24/7 for water emergencies · 1-800-555-0199

Foundation · Cost guide

Foundation and House Leveling Cost

Foundation leveling and house leveling cost: piers for slabs, shimming and jacking pier and beam houses, mudjacking vs foam, and what drives price.

Short answer

Foundation leveling lifts settled parts of a house back toward level. Slab homes are leveled with piers or polyurethane foam; pier and beam houses are leveled by jacking and re-shimming or adding piers from the crawl space. Costs vary widely: HomeAdvisor puts mudjacking a 1,500 sq ft foundation at about $4,500 to $9,000 and foam at $9,000 to $37,000; pier-based leveling is priced per pier at roughly $1,000 to $3,000 each.

Leveling is the visible result homeowners want: floors flat, doors closing. But a house rarely goes back to perfectly level, and lifting too fast cracks finishes and pipes. Good contractors lift gradually and tell you up front what's realistic.

Foundation leveling methods by foundation type

Foundation Method Notes
Slab Steel or helical piers Lifts and stabilizes the perimeter
Slab (interior) Polyurethane foam Lifts settled interior areas
Pier and beam Jack and re-shim Cheapest if piers are sound
Pier and beam Add or replace piers Where piers settled or are too far apart
Basement Piers under footings Often combined with wall repair

See pier and beam foundations for leveling a pier and beam house.

House leveling cost

Item Typical cost
Mudjacking a 1,500 sq ft foundation $4,500 – $9,000
Polyurethane foam, 1,500 sq ft $9,000 – $37,000
Piers (per pier) $1,000 – $3,000
Pier and beam repair (typical) $6,000 – $14,000

Sources: HomeAdvisor via Angi, This Old House, Angi.

What drives the price

  • How much of the house moved and how far.
  • Foundation type and access (crawl space height, slab interior).
  • Soil and depth to firm bearing.
  • Plumbing testing and repair after lifting.
  • Finishes: drywall, tile and trim repairs after the lift.
Leveling lifts settled areas gradually; a house rarely returns to perfectly level.

The leveling process

  1. Elevation survey to set a target.
  2. Install supports (piers, shims, foam).
  3. Lift in stages, checking floors and finishes.
  4. Plumbing test after lifting.
  5. Re-measure after a season.
Pro tip

Ask the contractor to write down the target lift and the tolerance they'll accept. "As level as possible" is not a measurable promise; "within 1 inch across the floor" is.

How much lift is realistic?

Contractors usually lift only as far as the house can go without new damage. Old framing, plaster walls, tile and brick can crack during a lift. Expect a target like "within an inch across the floor" rather than perfectly flat, and expect some cosmetic repairs after.

Leveling a pier and beam house, step by step

  1. Survey floor elevations to map highs and lows.
  2. Jack beams in small increments from the crawl space.
  3. Re-shim with hardwood or steel shims at each pier.
  4. Replace or add piers where piers sank or spans are too long.
  5. Re-check floors and doors.

See pier and beam foundations.

Leveling a slab house

Slab homes are typically leveled with steel or helical piers around the perimeter and foam or interior piers inside. Lifting a slab can stress drain lines underneath, so a plumbing test before and after is common.

Signs your house needs leveling

  • Floors you can feel slope when walking.
  • A marble or ball rolls consistently in one direction.
  • Doors swing open or closed on their own.
  • Gaps between baseboards and floor, or between cabinets and walls.
  • Cracks over doors and windows that keep returning.

Leveling contractors: what to compare

Item Why it matters
Elevation survey with numbers Shows how much movement exists
Target lift and tolerance Sets expectations in writing
Method and support count Explains the price
Plumbing test before and after Protects against hidden damage
Cosmetic repair responsibility Who fixes cracked drywall afterward
Warranty What happens if it moves again

After leveling

Give the house a few weeks to settle before repairing drywall and trim. Keep gutters and grading in good shape so soil moisture stays steady, which is what keeps a leveled house level.

Frequently asked questions

How much does house leveling cost?

It depends on method and size. Mudjacking a 1,500 sq ft foundation is about $4,500 to $9,000; piers run about $1,000 to $3,000 each.

Can a house be leveled completely?

Often not perfectly. Contractors lift as far as the structure allows without causing new damage.

How is a pier and beam house leveled?

By jacking the beams and re-shimming, and adding or replacing piers where they settled.

How long does foundation leveling last?

Pier-based leveling is designed to be permanent; shimming may need adjustment as soil moves.

How long does house leveling take?

Many jobs take one to three days; complex slab work or large homes take longer.

Will leveling fix my sticking doors?

Often, if the doors stick because of settlement. Some doors still need planing or rehanging after the lift.

Does house leveling crack walls?

It can. Lifting moves the structure, and rigid finishes like plaster and tile sometimes crack. Gradual lifting reduces it.

Can I level my house myself?

Not safely for structural leveling. Jacking a house without engineering and proper supports risks serious damage.

Foundation leveling is a precision job; the right crew lifts slowly and measures as they go. Call the number on this page to reach a participating local foundation repair company.

Expert review: pending Foundation reviewer
Required credential:PE, structural

Written and fact-checked by DryLevel editors, last updated 2026-11-16. Costs come from the sources linked in the article. Read our editorial policy or report a correction.

Call 1-800-555-0199