How the foundation crack checker sorts cracks
| Result | Usually triggered by |
|---|---|
| Monitor it | Thin, stable vertical or diagonal crack, no water |
| Seal the leak | Thin crack that lets water in |
| Get it assessed soon | Stair-step cracks, 1/8 to 1/4 inch, growing, sticking doors |
| Structural assessment now | Horizontal cracks, bowing, displacement, over 1/4 inch |
Angi notes that cracks wider than 1/8 inch or raised on one side could indicate structural damage (Angi). Costs in the results come from HomeGuide's crack repair and foundation inspection data (HomeGuide, HomeGuide).
How to measure a crack
- Use a crack gauge, a ruler or a set of feeler gauges at the widest point.
- Check whether one side sticks out further than the other.
- Photograph it with a coin or ruler in the shot.
- Mark the ends with a pencil and the date.
See foundation cracks for photos and explanations of each type.
Frequently asked questions
Can this tool tell me if my foundation is failing?
No. It's a rule-of-thumb guide. Only an on-site inspection can diagnose movement and cause.
Are vertical cracks less serious than horizontal ones?
Usually. Thin vertical cracks in poured walls are often shrinkage; horizontal cracks in basement walls usually come from soil pressure.
Does the checker work for brick and block walls?
Yes. Choose stair-step for cracks that follow mortar joints. Those usually point to settlement and are worth an assessment.
What should I do after using it?
Follow the result: monitor, seal, or book an assessment. Keep your photos and measurements for the contractor or engineer.
The foundation crack checker gives you a starting point, not a diagnosis. For an on-site opinion, call the number on this page to reach a participating local foundation repair company.