Foundation underpinning is strengthening a foundation by extending its support deeper, onto firmer soil or rock. In US homes it is most often done with steel push piers, helical piers or concrete piers. Angi puts underpinning at about $10,000 to $30,000 for a typical job, with an average around $25,000, at $1,000 to $3,000 per pier and roughly 10 piers per house.
Underpinning is the fix when the soil under the footings can't carry the house: it settled, washed out, or was never compacted properly. It is different from crack repair, which only seals; underpinning addresses the cause of settlement.
When do you need underpinning?
- Ongoing settlement: cracks keep widening, doors keep sticking.
- Sinking corners or one side lower than the other.
- Soil problems confirmed by an engineer: expansive clay, poorly compacted fill, erosion.
- Adding a story or heavy load the old footing wasn't designed for.
- Lowering a basement (basement underpinning) to gain headroom.
Foundation underpinning methods
| Method | How it works | Typical use |
|---|---|---|
| Push piers | Steel tubes driven to bedrock or firm soil | Settled homes, heavier structures |
| Helical piers | Steel screw piers turned in to set torque | Lighter structures, slabs |
| Concrete piers | Pressed or poured concrete columns | Firm soil at modest depth |
| Mass concrete | Excavate under the footing in sections, fill with concrete | Shallow fixes, older masonry |
| Basement underpinning | Dig and pour new, deeper footings in sequence | Gaining ceiling height |
See foundation piers for a full comparison.
Underpinning cost
| Item | Typical cost |
|---|---|
| Per pier | $1,000 – $3,000 |
| Average per pier by type (segmented / concrete / steel push / helical) | $1,700 / $2,100 / $2,700 / $3,500 |
| Typical full underpinning job | $10,000 – $30,000 (avg ~$25,000) |
How to choose an underpinning contractor
- Get an independent engineer's report first, so bids answer the same scope. See foundation inspection.
- Ask each contractor for pier type, count, spacing and depth.
- Ask whether they will lift or only stabilize.
- Confirm permits, which most jurisdictions require.
- Get the warranty in writing, and whether it transfers to a buyer.
Be wary of a quote that names a pier count before anyone has measured the floor or reviewed the soil. Pier count should come from the elevation survey and the load, not a standard package.
Underpinning vs other foundation repairs
| Repair | What it fixes |
|---|---|
| Underpinning (piers) | Settlement from weak soil |
| Crack injection | Leaks through cracks |
| Wall anchors or straps | Walls bowing from soil pressure |
| Mudjacking or foam | Sunken slabs and flatwork |
| Drainage | Water causing movement |
If the problem is a bowing wall, underpinning isn't the fix; if it's settlement, crack injection won't stop it.
Permits and engineering
Underpinning usually needs a permit and, in many areas, a stamped engineering plan. A contractor who suggests skipping the permit is creating a problem for your next sale, when a buyer's inspector or lender asks for records.
Living in the house during underpinning
Most pier underpinning is done from outside with the family at home. Expect noise, excavation holes, and possibly new cracks or sticking doors during a lift, which are repaired after things settle.
The underpinning process, start to finish
- Engineering: inspection, elevation survey, and a design showing pier locations and loads.
- Permit: filed by the contractor where required.
- Excavation: small pits at each pier location along the footing.
- Installation: piers driven or screwed to depth, with pressure or torque recorded.
- Lift or stabilize: load transferred to the piers, with gradual lifting if planned.
- Backfill and restore: pits filled, concrete and landscaping patched.
- Final documentation: pier log, warranty, and any engineer sign-off.
Underpinning red flags
- No measurements before the price.
- Pressure to sign the same day for a "discount".
- No mention of permits or engineering.
- Vague warranty wording, or a warranty that isn't transferable.
- A plan that ignores obvious drainage problems.
What happens to the house during a lift
Walls, ceilings and tile can crack as the structure moves back toward level, and doors may need adjusting. Plumbing under slabs can be stressed. A good contractor explains this up front, lifts gradually and recommends a plumbing test.
Frequently asked questions
What is underpinning?
Underpinning extends a foundation's support to deeper, stronger soil or rock, usually with piers, to stop settlement.
How much does underpinning cost?
Angi lists typical totals of $10,000 to $30,000, around $25,000 on average, depending on pier type and count.
Can you underpin a basement?
Yes. Basement underpinning digs new, deeper footings in sections, often to lower the floor and gain ceiling height. It is a major, engineered project.
How long does underpinning take?
Many pier jobs on a house take a few days; basement lowering takes much longer.
Is underpinning worth it?
When an engineer confirms ongoing settlement from weak soil, underpinning stops it, which protects the structure and resale value.
Does underpinning lift the house?
Pier-based underpinning often lifts the house partway back toward level, depending on the structure.
How long does underpinning last?
Steel pier systems are designed to be permanent; warranties often run for the life of the structure. Read the warranty for exact terms.
Can underpinning be done in winter?
Often yes, though frozen ground can slow excavation. Ask local contractors about seasonal scheduling.
Foundation underpinning is a big decision, so get the diagnosis first and compare quotes on the same scope. Call the number on this page to reach a participating local underpinning contractor.
Written and fact-checked by DryLevel editors, last updated 2026-11-16. Costs come from the sources linked in the article. Read our editorial policy or report a correction.