Free referral line · Independent guides, every cost sourced Calls answered 24/7 for water emergencies · 1-800-555-0199

Free tool · Water Damage

Water Damage Cost Estimator

Enter the size of the wet area and the type of water to see a typical restoration cost.

Estimate your water damage cost

What kind of water?
About $1,050 for 300 sq ft of clean-water damage.

Uses Angi's average restoration cost per sq ft by water type ($3.50 clean, $5.25 gray, $7.50 black). Real quotes vary with drying time, materials removed and rebuild work.

How the water damage cost estimator works

The estimator multiplies the affected area by Angi's average restoration cost per square foot for each water category: $3.50 for clean water, $5.25 for gray water and $7.50 for black water (Angi). Angi puts most water damage restoration jobs between $1,361 and $6,282, about $3,822 on average.

What the estimate leaves out

Not included Why it matters
Rebuild (drywall, paint, flooring) Often priced separately after drying
Mold remediation Needed if materials stayed wet too long
After-hours emergency fees Night and weekend calls can cost more
Contents cleaning or pack-out Furniture, boxes, clothing
Plumbing or roof repair Fixing the source is a separate trade

See the full water damage restoration cost guide for each line item.

How to measure the affected area

  1. Measure each wet room's length and width and multiply.
  2. Add the rooms together.
  3. Include areas where water ran under walls or cabinets.
  4. If water reached a ceiling below, add that room too.

Measure quickly: the EPA advises drying wet materials within 24 to 48 hours to prevent mold (EPA).

Pro tip

Water travels further than it looks. A moisture meter reading at the edge of the visible stain often shows wet drywall or flooring a few feet beyond it.

Frequently asked questions

How accurate is a water damage cost estimate?

It gives a typical figure for planning. Real quotes depend on drying time, what has to be removed, access and local labor rates.

What's the difference between the water categories?

Clean water comes from a supply line or rain; gray water carries some contamination, like from a washer; black water includes sewage and floodwater and needs the most removal.

Why is black water so much more expensive?

Sewage and floodwater mean more materials are removed, plus cleaning, disinfection and protective equipment.

Does insurance pay this amount?

If the damage is covered, your insurer pays the approved scope minus your deductible. See does insurance cover water damage.

The water damage cost estimator gives you a planning number; a real quote needs someone on site. Call the number on this page to reach a participating local restoration company.

Call 1-800-555-0199